How do I enroll a second DSC NEO keypad?

Victor · Post time 2021-11-14 20:21:36

Edited by Victor at 2021-11-14 20:23

After automatically enrolling the first keypad, any additional keypads or modules must be enrolled using programming section 902.

1. Enter programming on the working keypad: *8-installer code.
2. Enter 902.
3. It should already be on subsection 000 so you can press * or enter 000. It will go through and automatically enroll any keypads and modules to the next available slot on the system.
4. Press # a few times to exit programming mode.

		Remember me	Forgot password?
Password			Register